Part Number Hot Search : 
89C513 PEF2256 IP101 P4KE16A AS339 2SK20 LD422243 TSV521A
Product Description
Full Text Search
 

To Download TK55D10J1 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 TK55D10J1
TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (Ultra-High-Speed U-MOS)
TK55D10J1
Switching Regulator Applications
* * * * * * High-Speed switching Low gate charge: Qg = 110 nC (typ.) Low drain-source ON resistance: RDS (ON) = 8.4 m (typ.) High forward transfer admittance: |Yfs| = 110 S (typ.) Low leakage current: IDSS = 10 A (max) (VDS = 100 V) Enhancement mode: Vth = 1.1 to 2.3 V (VDS = 10 V, ID = 1 mA)
1.10.15 2.8Max. 10.00.3 9.50.2 A 0.60.1 3.650.2
Unit: mm
3.2 2.8 9.0 15.00.3 0.750.25 12.80.5 4.50.2 +0.25 0.57 -0.10
Absolute Maximum Ratings (Ta = 25C)
Characteristics Drain-source voltage Drain-gate voltage (RGS = 20 k) Gate-source voltage Drain current DC Pulse (Note 1) (Note 1) Symbol VDSS VDGR VGSS ID IDP PD EAS IAR EAR Tch Tstg Rating 100 100 20 55 210 140 382 55 9.4 150 -55 to 50 Unit V V V
0.620.15 0.2 M A 2.54 2.54
2.530.2
1
2
3
A W mJ A mJ C C
Drain power dissipation (Tc = 25C) Single pulse avalanche energy (Note 2) Avalanche current Repetitive avalanche energy (Note 3) Channel temperature Storage temperature range
1: Gate 2: Drain (Heat Sink) 3: Source
JEDEC JEITA TOSHIBA
2-10V1A
Weight: 1.35 g (typ.)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Thermal Characteristics
Characteristics Thermal resistance, channel to case Thermal resistance, channel to ambient Symbol Rth (ch-c) Rth (ch-a) Max 0.89 83.3 Unit C/W C/W
Internal Connection
2 1
3
Note 1: Ensure that the channel and lead temperatures do not exceed 150C. Note 2: VDD = 25 V, Tch = 25C, L = 200 H, IAR = 55 A , RG = 1 Note 3: Repetitive rating: pulse width limited by maximum channel temperature This transistor is an electrostatic-sensitive device. Handle with care.
1
2009-09-29
TK55D10J1
Electrical Characteristics (Ta = 25C)
Characteristics Gate leakage current Drain cut-OFF current Drain-source breakdown voltage Gate threshold voltage Drain-source ON resistance Forward transfer admittance Input capacitance Reverse transfer capacitance Output capacitance Rise time Symbol IGSS IDSS V (BR) DSS V (BR) DSX Vth RDS (ON) Yfs Ciss Crss Coss tr ID = 27 A VOUT RL = 1.9 VDS = 10V, VGS = 0 V, f = 1 MHz Test Condition VGS = 16 V, VDS = 0 V VDS = 100 V, VGS = 0 V ID = 10 mA, VGS = 0 V ID = 10 mA, VGS = -20 V VDS = 10 V, ID = 1 mA VGS = 4.5 V, ID = 27A VGS = 10 V, ID = 27A VDS = 10 V, ID = 27 A Min 100 55 1.1 55 Typ. 9.0 8.4 110 5700 390 1000 7 Max 10 10 2.3 12.0 10.5 pF Unit A A V V m S
10 V

ns


Turn-ON time Switching time Fall time
ton
VGS 0V
30
4.7
tf
VDD 50 V - Duty < 1%, tw = 10 s = VDD 80 V, VGS = 5 V, ID = 55A - VDD 80 V, VGS = 10 V, ID = 55A - VDD 80 V, VGS = 10 V, ID = 55A -
20

nC
Turn-OFF time Total gate charge (gate-source plus gate-drain) Gate-source charge 1 Gate-drain ("miller") charge Gate switch charge
toff
130 63 110 17 32 38
Qg Qgs1 Qgd QSW

Source-Drain Ratings and Characteristics (Ta = 25C)
Characteristics Continuous drain reverse current (Note 1) Pulse drain reverse current Forward voltage (diode) Reverse recovery time Reverse recovery charge (Note 1) Symbol IDR IDRP VDSF trr Qrr Test Condition IDR = 55 A, VGS = 0 V IDR = 55 A, VGS = 0 V, dIDR/dt = 50 A/s Min Typ. -0.9 67 84 Max 55 220 -1.2 Unit A A V ns nC
Marking
Note 4: A line under a Lot No. identifies the indication of product Labels. Not underlined: [[Pb]]/INCLUDES > MCV Underlined: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]] Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
K55D10J 1
Part No. (or abbreviation code) Lot No. Note 4
2
2009-09-29
TK55D10J1
ID - VDS
50 8 10 6 4 200 COMMON SOURCE Tc = 25C PULSE TEST 3.5 3.4 8 10 160 6
ID - VDS
COMMON SOURCE Tc = 25C PULSE TEST 4 120 3.7 80 3.5 40 VGS = 3V
(A)
40
DRAIN CURRENT ID
30
20 3.2 10 VGS = 3V 0 0
DRAIN CURRENT ID
(A)
1.0
0.2
0.4
0.6
0.8
0
0
2
4
6
8
10
DRAIN-SOURCE VOLTAGE
VDS
(V)
DRAIN-SOURCE VOLTAGE
VDS
(V)
ID - VGS
COMMON SOURCE VDS = 10V PULSE TEST
VDS - VGS VDS (V)
2 COMMON SOURCE Tc = 25C PULSE TEST
200
(A)
160
1.6
DRAIN CURRENT ID
120
DRAIN-SOURCE VOLTAGE
1.2 ID = 55A 0.8
80 100 25 40 Tc = -55C 0 0 1 2 3 4 5
27 0.4 13
0
0
4
8
12
16
20
GATE-SOURCE VOLTAGE
VGS
(V)
GATE-SOURCE VOLTAGE
VGS
(V)
RDS (ON) - ID Yfs - ID FORWARD TRANSFER ADMITTANCE Yfs (S)
1000 100 COMMON SOURCE Tc = 25C PULSE TEST
100
Tc = -55C 25 100
DRAIN-SOURCE ON RESISTANCE RDS (ON) (m)
COMMON SOURCE VDS = 10 V PULSE TEST
10
VGS = 10V 4.5
10
1 0.1
1
10
100
1000
1
1
10
100
1000
DRAIN CURRENT ID
(A)
DRAIN CURRENT ID
(A)
3
2009-09-29
TK55D10J1
RDS (ON) - Tc
20 1000 ID = 55A
IDR - VDS
COMMON SOURCE Tc = 25C PULSE TEST
DRAIN-SOURCE ON RESISTANCE RDS (ON) (m)
16 VGS = 4.5V 13 8 ID = 55A 27 13 27
DRAIN REVERSE CURRENT IDR (A)
COMMON SOURCE PULSE TEST
100
12
VGS = 10V
10 10
5
3
4
0 -80
-40
1 0 40 80 120 160 0
1 0.4
VGS = 0V 0.8 1.2 1.6 2
CASE TEMPERATURE
Tc
(C)
DRAIN-SOURCE VOLTAGE
VDS
(V)
CAPACITANCE - VDS
10000 5 Ciss
Vth - Tc
GATE THRESHOLD VOLTAGE Vth (V)
(pF)
4
1000
Coss
C
3
CAPACITANCE
100
Crss
2
10 COMMON SOURCE VGS = 0 V f = 1 MHz Tc = 25C 1 10 100
1
COMMON SOURCE VDS = 10 V ID = 1 mA PULSE TEST -40 0 40 80 120 160
1 0.1
0 -80
DRAIN-SOURCE VOLTAGE
VDS
(V)
CASE TEMPERATURE
Tc
(C)
PD - Tc VDS (V)
200
DYNAMIC INPUT / OUTPUT CHARACTERISTICS
100 20 COMMON SOURCE ID = 55 A Tc = 25C PULSE TEST 16
DRAIN POWER DISSIPATION PD (W)
80
150
DRAIN-SOURCE VOLTAGE
60
VDD = 20 V 80V
12 40V 8
100
40
50
20
VGS
4
0 0
40
80
120
160
200
0
0
30
60
90
120
0 150
CASE TEMPERATURE
Tc
(C)
TOTAL GATE CHARGE
Qg
(nC)
4
2009-09-29
GATE-SOURCE VOLTAGE
VGS
VDS
(V)
TK55D10J1
rth/Rth (ch-c) - tw
10
NORMALIZED TRANSIENT THERMAL IMPEDANCE rth (t)/Rth (ch-c)
1 Duty=0.5 0.2 0.1 0.1 0.05 0.02 0.01 0.01 10 SINGLE PULSE PDM t T Duty = t/T Rth (ch-c) = 0.89C/W 1m 10m 100m 1 10
100
PULSE WIDTH
tw (s)
SAFE OPERATING AREA
1000 ID max (PULSED) * 100 ID max (CONTINUOUS) 500
EAS - Tch
1 ms *
AVALANCHE ENERGY EAS (mJ)
100 s *
400
(A)
300
DRAIN CURRENT ID
10
200
DC OPERATION Tc = 25C 1
100
0.1
0 25 Single pulse Ta=25 Curves must be derated linearly with increase in temperature. 10 100
50
75
100
125
150
CHANNEL TEMPERATURE (INITIAL) Tch (C)
VDSS max 1000
0.01 1
DRAIN-SOURCE VOLTAGE
VDS
(V)
20 V 0V
BVDSS IAR VDD VDS
TEST CIRCUIT RG = 1 VDD = 25 V, L = 200H
WAVE FORM
AS =
1 B VDSS L I2 B - VDD 2 VDSS
5
2009-09-29
TK55D10J1
RESTRICTIONS ON PRODUCT USE
* Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively "Product") without notice. * This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission. * Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application that Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS. * Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document. Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious public impact ("Unintended Use"). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this document. * Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part. * Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable laws or regulations. * The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. * ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT. * Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products (mass destruction weapons). Product and related software and technology may be controlled under the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. * Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product. Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of noncompliance with applicable laws and regulations.
6
2009-09-29


▲Up To Search▲   

 
Price & Availability of TK55D10J1

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X